This Week’s Top Deals for Filmmakers – Sony, Apple, FUJIFILM, Atomos and More

Here is our weekly selection of new exciting deals for filmmakers available. We have selected the best offers of filmmaking gear from our partners’ online shops for this week – including the Sony Alpha a7 II, LED lights from Manfrotto and Rotolight, an Atomos Shogun Flame monitor/recorder, an Apple 21.5″ iMac and more. Watch out – The first deal within this week’s article expire in a couple of hours! I went through the current deals on our partners’ websites and have selected the best offers currently available which I think could be interesting for you. First, there are B&H offers listed for our readers based in North and South America, and then there are a couple of deals from our European partner CVP. By shopping at our partners’ stores, you are supporting cinema5D through our buy links, as we get a small affiliate commission when a purchase is completed. Now, let’s take a look at this week’s top deals for filmmakers:

B&H: Apple 21.5″ iMac with Retina 4K Display (Mid 2017) – $600 Discount

01_Deals_iMac This Apple’s iMac all-in-one computer features a beautiful 21.5″ 4096 x 2304 IPS Retina 4K display. In terms of processing, there is a 3.0 GHz Intel Core i5 Quad-Core processor, 16GB of DDR4 RAM, a 1TB Hard Drive, and an AMD Radeon Pro 555 Graphics Card (2GB). In terms of connectivity, there are two 40 Gb/s Thunderbolt 3 ports, four 5 Gb/s USB 3.0 Type-A ports, a Gigabit Ethernet port, a 3.5mm headphone jack, and a UHS-II SDXC card slot. Watch out – This deal expires today, in just a couple of hours! Buy link: Apple 21.5″ iMac with Retina 4K Display (Mid 2017) Was: $1,499.00 Now: $899.00 (Savings: $600.00)

B&H: Sony Alpha a7 II with 28-70mm Lens and Accessories – $600 Discount

02_Deals_Sony Everything you need to start shooting is included in this kit: a Sony Alpha a7 II mirrorless camera with a 28-70mm F/3.5-5.6 OSS lens, a spare battery, a protective camera bag, and a 32Gb memory card. The Sony Alpha a7 II features a full-frame 24.3-megapixel sensor. Also, the sensor is 5-axis stabilized. It can shoot 1080P videos up to 60 frames per second. If you need to shoot in LOG, no problems, you can film in S-Log and S-Log2 gamma. The lens mount of the camera is an E-mount. So, it is compatible with any APS-C E-mount lenses (in APS-C crop mode) as well as all E-mount full-frame Zeiss and Sony G-series lenses. It’s an excellent entry-level camera if you are starting. Watch out – This deal expires on August 24 at 11:59 PM ET Buy link: Sony Alpha a7 II with 28-70mm Lens and Accessories. Was: $1598.00 Now: $998.00 (Savings: $600)

B&H: FUJIFILM X-H1 with Battery Grip and Accessories – $300 Discount

03_Deals_Fujifilm The FUJIFILM X-H1 is a mirrorless camera that features a 24.3MP APS-C sensor. There is an in-body 5-axis image stabilization system, which can compensate for up to 5.5 stops of shutter speed. The FUJIFILM X-H1 can shoot DCI 4K videos at up to 24 frames per second with a solid 200 Mb/s bitrate internally. If you want to film in slow-motion, you can go up to 120 fps in 1080P. The kit comes with a 32Gb SD card and a protective camera bag. Buy link: FUJIFILM X-H1 with Battery Grip and Accessories. Was: $1299.95 Now: $999.95 (Savings: $300)

B&H: Lowepro PhotoStream RL 150 Roller – $100 Discount

04_Deals_Lowepro When it comes to travel with photo/video equipment safely, Lowepro roller bags are top-notch (and your back will thank you). The overall dimensions should fit almost all international carry-on regulations. The Lowepro PhotoStream RL 150 Roller can hold 1-2 professional DSLR camera bodies, and up to 8 different lenses. Also, you can entirely modify the interior layout to fit your gear and needs. A 15″ laptop can be stored in the dedicated hinged compartment for smooth airport security visits. There is a side tripod mount to carry a small/medium-sized tripod. Buy link: Lowepro PhotoStream RL 150 Roller. Was: $269.95 Now: $169.95 (Savings: $100)

B&H: Atomos Shogun Flame – $300 Discount

05_Deals_Atomos The Atomos Shogun Flame is a powerful 7″1920 x 1200 on-camera recorder/monitor. The display is a 10-bit FRC panel that supports native display of HDR (log) footage as well as high brightness viewing of Rec. 709 footage. There are various 4K HDMI and 12G-SDI inputs/outputs ports, and it can even cross-convert your signal. It records onto 2.5″ SSDs using 10-bit, 4:2:2 Apple ProRes and Avid DNxHR codecs. Also, you can even record DCI 4K (4096 x 2160) raw video streams over SDI from select Sony and Canon cameras, encoding it as ProRes/DNxHR files. Buy link: Atomos Shogun Flame 7″ 4K HDMI/SDI Recording Monitor. Was: $995.00 Now: $695.00 (Savings: $300)

CVP: Rotolight NEO 2 – 90€ Discount

06_Deals_Rotolight The Rotolight NEO 2 is a nice little bi-color continuous LED light that doubles as an HSS Flash. It is lightweight and portable and can be mounted both on or off-camera. You can power it via 6 AA batteries, DC or D-tap. It also features a couple of CineSFX custom lighting effects (Lightning, Fire, TV, etc.) Buy link: Rotolight NEO 2. Was: 273.13€ Now: 181.18€ (Savings: 91.95€)

CVP: Timecode Systems SyncBac PRO – 150€ Discount

07_Deals_Syncbac If you need multiple GoPro cameras to stay in sync, look no further. The Timecode Systems SyncBac PRO attaches to the back of your GoPro and gives you access to perfect timecode synchronization. Buy link: Timecode Systems SyncBac PRO. Was: 207.83€ Now: 58.05€ (Savings: 149.78€)

CVP: Gudsen MOZA Aircross Gimbal – 45€ Discount

08_Deals_Gudsen The Gudsen MOZA AirCross gimbal is one of the most compact, ultra-lightweight and portable camera stabilization systems for DSLR and mirrorless cameras. It supports all cameras with a maximum payload of 1.8kg (3.96 lbs). The beautiful thing is that the base plate for mounting the camera is compatible with Manfrotto 501PL and Arca quick release plate. Buy link: Gudsen MOZA Aircross Gimbal. Was: 290.43€ Now: 244.92€ (Savings: 45.52€)

CVP: Manfrotto Spectra 1×1 Daylight LED Panel – 295€ Discount (Ex-Showroom item)

09_Deals_Manfrotto If you are looking for an affordable 1×1 LED light, look no further! The Manfrotto Spectra 1×1 F is a 5600°K (daylight) panel with an output of around 1400 lux at 1m with a CRI over 90. Light is emitted with a beam angle of 50°. You can power it via an external 100-240V AC adapter (included) or by a V-Lock or AB battery (not included). You can dim it from 0 to 100% with no color shift, nor flickering. The Manfrotto Spectra 1×1 F is ultra-slim (only 5cm thick) and lightweight (1,36Kg). Buy link: Manfrotto Spectra 1×1 Daylight LED Panel. Was: 490.75€ Now: 195.57€ (Savings: 295.18€)

CVP: Freefly MoVI M15 – 7830€ Discount (Ex-Showroom item)

10_Deals_Freefly The Freefly MoVI M15 is out for a few years now, but this impressive gimbal can still support 15 lbs/6.8kg, which means it can take from an ARRI Alexa M up to a Sony F55 with Cinema lenses. It is potent and super smooth. If you are not after the latest tech, this gimbal is a great deal! Buy link: Freefly MoVI M15. Was: 10564.47€ Now: 2732.95€ (Savings: 7831.52€) What do you think of this week’s selection? Share with us if you know and like any of these products.

BMPCC 6K Review & Footage – Five Reasons to Like the Pocket 6K

The new Blackmagic Pocket Cinema Camera 6K has already started to ship (although it’s not so clear in what quantities), but based on the excitement and interest in this camera, it was important for us to put it through its paces as quickly as possible. In our previous article and video I’ve already highlighted the similarity and differences between the new camera and its sibling, the BMPCC 4K, and now it was about time to go out and create some nice images with it. 

BMPCC 6K camera

Blackmagic Design was proud to release a “Pocket” camera with an APS-C sensor and a Canon EF mount. Are those two reasons enough to make one buy the new camera? From the feedback we have been getting from our audience, the answer is apparently yes! Combining robust acquisition codec(s) with an attractive price makes people “forgive” some lacking features that would be useful. It has been a while since I shot with the older Blackmagic Pocket Cinema Camera 4K and being out and about with the new 6K version reminded me of what I liked when first filming with the Pocket 4K. I was also reminded why for me as a documentary filmmaker, it’s a mixed bag in many ways. But first things first, so let’s start on all the positive notes, and there are quite a few.

BMPCC 6K – Five Reasons to Love it

1- Picture quality: Let me start with the obvious: Blackmagic has proven again that one of the main advantages of their cameras (including the new Ursa Mini G2 and the BMPCC 6K) is its color science. The picture looks organic, “film-like” and has its own identity. Now with the addition of 6K, this is even more noticeable. The footage coming out of this camera is simply beautiful! 2- Recording Codecs: Blackmagic Design is the ONLY manufacturer who gives the filmmaking community a budget tool to record with proper codecs internally. If there is anything I’m learning to dislike in our industry it’s H264/H265 and external recorders. Both are highly hyped and could be completely avoided if manufacturers took the initiative to do so, because alternatives exist. By the way, licensing ProRes is free (yet needs Apple’s approval) and I have yet to understand what makes the camera makers stick with H264/H265 when the possibility to improve is there. (I’m not referring to ProRes RAW, where things gets a bit more complicated due to RED’s patents on some elements related to the encoding process.) Adding a robust recording codec will instantly save us money, will make us carry less accessories, and on top, will allow much faster and smoother editing. Blackmagic Design went a step further and in this camera (like in the BMPCC 4K) included their newly developed Blackmagic RAW codec. 3- Camera Operating System: I already mentioned it in previous posts and will continue to advocate it whenever possible: Blackmagic Design offers the best camera operating system I came across in recent times. It’s easy to understand, it’s logical to operate and there is no need to dive into ocean of pages and sub pages to find what you are looking for. 3- Resolution and Frame Rates: Personally, I think that the resolution race is a bit unnecessary, but in this price range, let it be. I’m one of those who is happy to have good internal 4K material. For now, recorded file sizes, overall picture quality and delivery (who has a TV with more than 4K resolution??) make absolute sense in 4K, especially if you are a documentary filmmaker like me. (As opposed to SFX professionals who might appreciate the higher resolution). HOWEVER, having said that, recording at a resolution greater than 4K can result in having a better 4K master – so in this case, the 6K (and it is beautiful!), might be a useful thing to have. With regards to frame rates, it is nice to see that the camera allows for a lot of flexibility in order to unleash creativity to its full potential or help with potential client requests. 4- Choice of Recording Media: This is one of my favourites: This camera (Like the BMPCC 4K), allows internal recording to SD and CFast cards, or externally to SSD. Indeed not all the mentioned recording media options bare the same recording possibilities and some impose limitations when attempting to film at higher frame rates. Nevertheless, having this flexibility of course helps with accommodating different needs and budgets. (Don’t forget that using the SSD option will eat the internal battery even faster – but more on battery life further down.) 5- Price: When it comes to value for money, this new camera gives an excellent fight to even more expensive cameras.

BMPCC 6K – Four Reasons to Doubt it

1- Cinema camera? I’ve deliberately chosen to start with this point. Ask 5 people what a “cinema camera” is and I bet you will be getting 10 different answers. In all honesty, I couldn’t care less about the word “cinema” in the camera title (The same goes for “Pocket”)…. If it does what it supposed to do and does it well, BRAVO! The way I look at it, the word “cinema” allows Blackmagic Design to elegantly avoid the subject of much necessary features like continuous autofocus and internal stabilisation altogether. (Maybe they would say, “It’s a cinema camera Johnnie, so why are you whining about those missing features ….”)

Nice resolution and sharp, but not good in direct sunlight: the LCD screen.

2- Big fixed LCD screen: The ones who are following my filmmaking work and article writing know that I’m already with one leg in the grave, meaning, the hair that once used to be on my head is now happily growing on my shoulders.  So how is this connected to the camera’s LCD screen? Well, as an old fashioned guy, give me a good EVF instead of a huge LCD and make me happy! This screen, as much as it is good for indoor menu navigation, is a complete nightmare to operate outdoors in bright sunlight. I wish Blackmagic Design would have considered making a “Cinema Pocket EVF”. An accessory that can easily be connected to this camera, maybe when being powered externally, so power consumption isn’t becoming even worse.

A necessity for me: a proper EVF on the camera.

3- Autofocus and In-Body Stabilisation System:  Yes, I mentioned it before, now it deserves its own dedicated few lines. Our production world is constantly changing and what was great before might not be good enough anymore. Good autofocus and in-body stabilisation systems are now far from being a luxury. They are becoming a necessity! The BMPCC 6K body size “shouts” mobility, so improvement is needed to make it truly portable. I’ll dare taking it a step farther and write that during my current shoot (just like with the BMPCC 4K before), I felt that I’m compromising on some of my shots and skipping what I really wanted to do, because the camera couldn’t do some of the things I needed it to do. In other words, I was working for the camera instead of it working for me, and it was always related to lacking continuous autofocus and the non-existent in-body stabiliser. This has NOTHING to do with its ability to produce beautiful images or shine when a certain shooting style is being implemented. It is about feeling limited when greater usability is needed (and offered by cameras competing at a similar size, for example the FUJIFILM X-T3.) 4- Camera Mount: For me, the choice of camera mount is odd and brilliant at the same time: Brilliant, because Blackmagic Design has experience with this mount from earlier on (URSA Mini), and for some of us, the EF mount offers the opportunity to use widely available lenses. On the other hand, it’s also an odd choice because this mount is completely outdated, even to the point that Canon themselves deserted it already by introducing the RF Mount for their mirrorless cameras. Not only that: As Canon stopped delivering mirrorless cameras that are appealing to many filmmakers (cameras that don’t compromise on good quality video), many of us moved on, sold our Canon equipment and invested in Sony, FUJIFILM or Panasonic. A modern short flange lens mount would have allowed users to easily adapt many of the (EF) lenses we already (or still) have, or, in some cases, even use a Metabones Speed Booster to get an even wider field-of-view, which would give this camera with an APS-C sensor full-frame image aesthetics.

6K Frame Grab – click for full 6K resolution image

BMPCC 6K – In the Field

High temperatures, light rain, dust, kids and horses. Facing it all, the camera performed very well! Additionally, no sign of overheating was spotted. The redesigned ventilation chamber proved to do a good job. Now, regarding resolution, frame rates and compression method, I decided to use Blackmagic RAW, 6K 2.4:1 .(6144×2560) resolution at 25p frame rate. (Constant bitrate was set on 5:1.) For slow-motion (120fps), I chose to film in 2.8K 17:9, 2868×1512. In order to get the cleanest possible image I took advantage of the dual ISO functionality of the camera and used ISO 400 for the outdoor shots and 3200 for indoor. A side note: The camera can record at a higher resolution (6144×3456), at a better compression (3:1) and even at a higher data rate (Constant Quality “Q0”), but, for this project and the number of recording media cards I had, the settings I chose to go with were sufficient. When it comes to lenses, I was surprised to see how limited the selection of Canon EF lenses at my disposal was. (I used to have so many more ….) So in order to cover different focal lengths and different shooting scenarios I went with a SIGMA 18-35mm (as alway, a beautiful, fast and sharp lens), a Canon 70-200mm f/4 IS, and a Canon 24mm EF-S f/2.8. Please don’t laugh, this lightweight pancake EF-S lens (modified at the back to fit the camera EF mount), proved to be good enough for handheld filming. The camera cage was from 8Sinn (fits perfectly – check our recent extensive BMPCC 4K Cage Shootout here in case you missed it)! For monitoring the image I used my Zacuto Gratical EVF. As for recording media, I used Angelbird’s AV Pro CF CFast 2.0 cards. Maybe not the cheapest, but very reliable. When it comes to powering the camera, I used a bunch of original Canon E6 batteries and that was just OK. I had enough of those to use and a place to charge when they got empty. Sound was recorded in camera and I’m pleased to say it is very clear and clean. (When using the camera’s internal mics there is some additional noise/hum, but for this mini documentary I used only an external mic for sound. Unfortunately and as you can see, during this project I had no chance to record scenes in low light conditions, but from a quick test I conducted at the office, the camera did surprisingly well! We might revisit lowlight capabilities in later more extensive tests with the camera. During my shoot, lighting conditions kept changing. Not ideal for the film itself but great for the test… Nice to see how the camera and codec are coping with highlights. I also put Katharina (the owner of the riding school) against the open grey sky just in order to that’s indeed possible to stretch the dynamic range quite a bit – there was still lots of detail in the skies after post production. What you can also notice from the video above: at times, I was struggling to keep my subjects in focus. I’m not sure why. Either I’m getting old, or maybe my Zacuto EVF is losing its juvenility, or, 6K is 6K, meaning, no excuses here when you don’t nail focus 100%. Either you are in focus or you are not…. So if I have to summarize my field experience with the camera, I can say it is like driving an electric car. You love many aspects of it yet at the same time must look closely at your mileage at all times (actually, battery levels). In addition, I felt like I should always be aware of the camera’s media consumption when filming in 6K. Both battery consumption and the hunger for storage with this camera need to be properly managed and planned for when shooting with this camera. Not directly related to the camera but important to mention here: it was the first time that I used Nexto DI NPS-10 for backing up some of the material. It is new, very intuitive and working extremely well! A full review will be coming soon.

6K Frame Grab – Click for full resolution 6K image

Editing the footage

You need to be aware that there’s no 6K recording option in ProRes: 6K can be recorded in-camera using Blackmagic RAW exclusively, and 4K can be recorded also in ProRes codecs. I am not sure if it’s technical limitation or if there’s a marketing reason behind it. (“Forcing” people to edit 6K RAW footage in Resolve only?) I don’t know. The data rate might have gotten out of hand with ProRes in 6K though, so we guess that’s the reason behind it. To my knowledge, no other editing platform can currently support Blackmagic RAW, with the exception of Adobe Premiere Pro. Yes, you heard it right, and it is not because of Adobe being so fast in adopting this RAW recording format. There is a way to edit Blackmagic RAW on Premiere, but in order to do so, you will need to use BRAW Studio from Autokroma. Windows and Mac are both supported and I’ve tried it and it is working like a charm! (The best $30 you can spend if you are editing in Premiere).

Conclusion

The Blackmagic Pocket Cinema Camera 6K is a great technical achievement and offers amazing value for money. Don’t forget that you will also get a full two-seat license of DaVinci Resolve Studio 16 with the camera. Yet, is it a camera for me, the independent documentary filmmaker? Here is a real life scenario that I encountered almost a year ago: I’m about to leave to India and shoot a short documentary under our “camera review umbrella” featuring an Indian wedding. At the time, I was able to choose between the (at that time) new Canon EOS R, or the BMPCC 4K. I know that in terms of picture quality the BMPCC 4K will beat the Canon EOS R hands down, but, I also know that as a one-man-band operator I might be struggling capturing the moments I need with the BMPCC 4K. Filming in such a demanding real-world environment is anyway not easy, so dealing with large amount of data/power consumption/focusing issues was not an option for me. And this is what I want to avoid, the hesitation of using a camera because of the possibility of limiting myself on the operational side. I hope my point is clear, and I also hope that Blackmagic Design (under the leadership of their visionary Grant Petty) can move forward by eventually creating a camera that keeps ALL the technical achievements of the BMPCC 6K but, add extended usability to it. In our third part of our BMPCC 6K coverage we will share our technical findings related to the camera’s dynamic range, latitude and rolling shutter effect results with you. Stay tuned. A special thanks to Katharina and Theresa Teschler. More information about their ridding school can be found by clicking here. Music for the above video is courtesy of MusicVine. Get 25% off your next music license with code C5D25 (valid for one use per customer). Color by Lutify.me What do you think about the new BMPCC 6K? Do you have any plans taking a closer look at it? Please share your thoughts with us below. 

Anamorphic Shooting – Is There an Ideal Sensor Size?

In this guest post, Vancouver-based freelance filmmaker and an anamorphic lens freak Tito Ferradans is sharing his thoughts about anamorphic shooting and the ideal sensor size with us.  The BMPCC 6K pushed anamorphic modes into Blackmagic’s cheaper models – such modes were previously reserved for the URSA lineup. Anticipating an increase in questions on this subject, I wrote this post. There are lots of misconceptions about sensor size and anamorphic shooting. I believe this started with the Panasonic GH4, but let me first explain the issue. Every other day I get messages from people “informing” me they can’t use 2x lenses because their camera does not have an anamorphic mode. They say they’re limited to 1.33x or 1.5x lenses and they don’t know what to choose. Some are even more hardcore and ask for camera recommendations. The Sony a7S II does not have an anamorphic mode, yet, I’ve been shooting anamorphic on it for three years now and it never gave me trouble. I recently got a Panasonic GH5 which features an anamorphic mode.

What is Anamorphic Mode, and why is it Good to Have it?

Anamorphic lenses squeeze more field of view onto the sensor. There’s a lot more to them, but this is the aspect we’re dealing with now. Let’s say the ideal anamorphic lens has a 2x squeeze, which means that you have to double the width of your footage in post production for your shot to look correct. Simple math time: shooting 16:9 (and then doubling the width of the frame) yields a bit of an extreme aspect ratio: 3.56:1, so far reserved for lens tests and Taylor Swift music videos. Cameras with anamorphic modes allow you to record different areas of the sensor, not necessarily 16:9. The GH4 allows 4:3 aspect ratio, the BMPCC 6K offers 6:5. Using a 2x scope, 4:3 becomes 2.66:1 and 6:5 becomes 2.4:1, classic CinemaScope. These modes are not using the full width of the sensor though. Basically, the camera is cropping out the sides of the footage for you. Is that what anamorphic mode represents? The exception here is the GH5 and its Open Gate mode. Since Panasonic’s GH series has a 4:3 sensor, their techs figured “why not let people record the entire sensor area?”. This leads us to the actual advantages of anamorphic modes.

What are the Advantages of Anamorphic Mode?

The minor advantages of an anamorphic mode are that it makes more efficient use of the available sensor area and thereby requires substantially less or no crop in post-production. It also allows for better use of the camera’s bitrate over the final image area. The biggest advantage of a proper anamorphic mode though is that it uses a larger sensor height compared to 16:9 video. If you look at the numbers and schematics below, the difference is easy to see on the GH5 and other cameras that record Open Gate. This gives you a frame that is not only wider after stretching, but also taller! But if you look at the BMPCC 6K, Ursa Mini 4.6K and others, things are a little different… Not only you are missing additional height offered in 16:9 modes, you are also locking yourself out of the valuable possibility of reframing in post-production.

So There are the Advantages of not Having/Using it?

If your camera has an anamorphic mode but it doesn’t add any height to the output compared to your other recording modes you are basically discarding information that could be useful later. That is why I never complained of shooting 2x anamorphic with the Sony a7S II. I set it up with 4:3 crop marks and record 16:9 all the way. The only thing that really matters is that I get clean footage in the marked 4:3 area. Anything usable beyond those marks is a bonus and it allows me to reframe in the editing process to balance out compositions or even create camera moves that didn’t exist before.

Sony a7S II + Atlas Orion 40mm T2 2x Anamorphic Lens. See how the 2.4:1 area is clear?

Bottom line: Always aim for the mode that gives you the most vertical resolution and better use of the sensor, even if you have to crop some of the frame later. You’ll have more data, more sensor area and more image to work with. If you’re on a tight deadline, sure, skip the crop and do it all in camera. Regardless, if you are lost or new on how to deal with those post-production aspects, I have videos up on how to set proper aspect ratios in all major editing software and how to crop footage easily too! Now, it looks as if to maximize your scope’s capabilities you will need to get the Panasonic GH5. 

An Afterthought in “Anamorfaking”

If you don’t have anamorphic lenses and you still want to craft the anamorphic look, the BMPCC 6K also offers a 2.40:1 recording mode that will give you a frame that is perfect CinemaScope although shot with spherical lenses. No need to hassle with cropping later. You can combine this aspect ratio with modified lenses and filters to create a look that would otherwise cost a fortune! More on anamorfaking soon in an upcoming post here on cinema5D. If you don’t have a brand new BMPCC 6K, most other cameras offer some type of crop marks or overlays that allow you to frame for 2.40:1 or 2.35:1 while still shooting 16:9. Framing with crop marks will give you an accurate idea of your final framing and save you from unexpected cropping issues such as too much headroom or chopped heads! Is filming with anamorphic lenses or adapters interesting for you? Would you like to craft your anamorphic filming skills by reading more related content on our site? Let us know in the comment section below. 

Z CAM E2 Cameras Firmware Update with ZRAW Capabilities

Good news for Z CAM E2 camera owners: the team at Z CAM released a new firmware update that unleashes ZRAW capabilities for various E2 camera models. Let’s take a closer look at it! ZCAME2_ZRAW_Featured

Z CAM E2 – Firmware 0.88 Includes ZRAW

The team at Z CAM launched a new firmware (version 0.88) for their E2 and E2c cameras. This firmware – and future firmware versions – should also be compatible with the upcoming E2 S6/F6/F8 cameras that are expected to launch later this year. Here is the complete list of the new features of this 0.88 firmware version:
  • Addition of ZRAW (partial-debayer), supports up to 4096×2160@30fps initially. 4K 60fps will be supported later.
  • No proxy recording is allowed when ZRAW is selected. You have to use an iOS device or the HDMI output to record proxy files.
  • Monitor preview LUT, x33 cube format.
  • Pre-rolling.
  • Possibility to capture still images (JPEG only).
  • VFR fine control, one frame per step.
  • Native ISO toggle control.
  • Parade view.
They also improved and corrected some bugs:
  • Card formatting compatibility.
  • AWB always use a white priority in Z-Log2.
  • Performance optimization.
  • Bugs fixed: Time Code sync to an external device and other minor bug fixes.
It’s always nice to see a manufacturer bringing new functionalities and long-awaited features to a product. Otherwise, there would be very little information about this new RAW format. You can download this new firmware directly on Z CAM’s website.

ZRAW VideoSuite

At the moment, one of the only things we know is that any NLE does not support this new Z CAM RAW format. To play and convert ZRAW footage, you have to use Z CAM’s new ZRAW VideoSuite software. This software is available on Windows 10 only. Hopefully, a Mac version will come out soon. ZRAW VideoSuite allows you to output your files in either DNxHR, H.265 or uncompressed YUV in 4:2:2 or 4:4:4 color sampling (H.265 is 4:2:2 only). Also, various DeNoise levels are available, as well as some essential color grading tools. To me, having to use another piece of software – only Windows compatible – is a bummer. It reminds me of the early days of the Canon C200’s Cinema Raw Light. Usually, these “conversion” software are poorly optimized, and they take a lot of time to render your footage. It’s just another step in the post-production workflow that slows you down in the creative process. I hope that ZRAW will be supported by other NLEs soon. What do you think of this new firmware version and the addition of ZRAW? Let us know in the comments below!

Cartoni RED LOCK Tripod Announced – Lightweight Camera Support

The Italian tripod manufacturer Cartoni has just announced four new products ahead of IBC 2019: two tripods and two tripod heads. Among these products, there is an exciting set of lightweight tripod legs: RED LOCK. This tripod for camera operators on the go weights only 6.5 lbs/ 3 kg but can support up to 132 lbs / 60 kg. Let’s take a closer look at these new products. Oh, and if you haven’t done so, please take a moment to watch our video which we visited the Cartoni family tripod factory facility and saw how their tripods are made. CartoniRedLock_Featured

Cartoni RED LOCK Tripod Legs

The latest addition in the Cartoni line of tripods is a lightweight set of sticks called the RED LOCK. With a weight of only 6.5 lbs / 3 kg, this aluminum tripod looks perfect for indie filmmakers and one-man-band shooters. But don’t let this two-stage tripod fool you, as it can support an incredible amount of weight, up to 132 lbs / 60 kg. CartoniRedLock_01 In terms of height, it measures 77 cm when fully folded. By pulling the two red levers, you can extend it to a maximum height of 153 cm / 60 inches. If you need to go low to the ground, you can quickly spread the legs thanks to the Smart Spreader and go as low as 50 cm / 19 inches. At the bottom of the tripod legs, there are integrated spike feet for shooting on uneven terrains. Also, the tripod comes with newly design rubber feet. There are no words on pricing from Cartoni except that it should be “surprisingly affordable” and will ship by the end of this year. CartoniRedLock_02

Cartoni MAXIMA 5.0

Amongst the new products, there is also a new 5.0 version of the famous MAXIMA tripod head. These MAXIMA Flat Mitchell / 150mm bowl base tripod heads are mostly used on feature films and high-end projects. The MAXIMA 5.0 features Cartoni’s patented counterbalance and can support a payload from 0 kg up to 50 kg. CartoniRedLock_03 The great thing with MAXIMA tripod heads compared to O’Connor ones, for example, is that all the controls are on the operator side (and the locks/knobs are silent). The rather long and sizeable sliding camera plate on top of the tripod head is compatible with ARRI, Sony, and O’Connor ones. The head comes with a telescopic pan bar and a short front pan bar. No words on pricing from Cartoni yet, but these MAXIMA tripod heads are usually aimed at rental houses as they are in the $10.000 range. The MAXIMA 5.0 will be available at the end of the year. CartoniRedLock_04

Cartoni Master 25 and S200

A much more affordable tripod head has also been announced, the Cartoni Master 25. This lightweight tripod head has a payload capacity of up to 30 kg / 66 lbs. It will be available in black & gold design and grey anodized aluminum. Finally, there is a new set of sticks aimed at sport and event shooters, the Cartoni Sport 200 tripod legs. It is made of aluminum, and the legs are angular, which should provide better sturdiness compared to standard tubes. The S200 weighs 10.5 kg / 23 lbs and can support every camera packages on the market with a payload capacity of up to 200 kg / 441 lbs. It accepts classic Mitchell flat base tripod heads. No words on pricing on any of these products, but they should ship by the end of the year. We will make sure to take a closer look at all of Cartoni’s new products during IBC 2019. What do you think of this new RED LOCK tripod legs? Have you ever used a Cartoni MAXIMA tripod head? Let us know in the comments down below!